The installation of the mould is an extremely important work.Mould installation personnel need to have operation pipe bender and adjust the tube bending die professional knowledge,the tube bending the quality is very important.Mould must be suitable for the size of the machine,if the value of the bending than originally planned big fitting,caused by the excessive machine load,the mechanical properties of the failure,and may hurt the operation of the peraonnel.Mould installation peraonnel must develop the personal safety consciousness ideas,die with the attitude of the installation must be safe to execute.All of the mould installation personnel should recognize themselves in the execution work,security and provide a safe environment for the operation of the importance of others.

(1)   Don’t start in the oil pump motor,the hand,fingers or any part of the body placed in the mould operation area.

(2)   Don’t read or understand the manual of the mould installation instruction,and the tool installation,adjustment or movement.

(3)   In work close to the machine,please don’t wear ties,jewelry or loose clothing.

(4)   If that can’t die too heavy with hands up,what should use of appropriate mechanical assembly method.Should be installed on the mould a tings,using the rings to keep mould parts hanging in the stability of the way.

(5)   Die before the installation,should first wiped clean,and remove dust,metal cutting or other foreign dirt,etc.Or will cause the match doesn’t agree with the phenomenon,can cause injury or machine,mould damage.

(6)   In order to perform the different operating,need to change the settings control bender,please make sure the selector switch setting is correct.And in the executive bent pipe before work,please determine first test run correctly.

(7)   Tube bending lubricating oil will make the area around the gliding,and dirty mould area careful with mould,in bend pipe will absorb the coating agent with the end,insert mould safe and practical use scope,in order to prevent the tube bending lubricating oil dropped on the machine.

(8)   When the pipe bender doesn’t work or unmanned operation,even a short time,in restarting before the machine,please check all switch configuration.